Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who enjoys the fast heating control of gas cooktops but needs an electric oven to bake? Discover a dual-fuel range cooktop that gives you the best of both worlds.
Gas cooktops are the preferred choice of many home chefs who have experience in the kitchen because of their superior temperature control. They also allow them to utilize advanced cooking techniques such as charring. These cooktops can be expensive, particularly in the event that you require an additional gas hook-up and electrician to install it.
What is a 13amp plug?
If you have dual fuel range cooker (also called an electric and gas oven) is required, you'll need an appropriate 13 amp plug. The plug will also have to be hard-wired into the cooker circuit ring by a competent electrician.
This ensures that the current passing through the plug is safe and not excessive, which could result in an electrical fire danger. The plug has an electrical fuse that regulates the current. The fuse will blow when it is deemed to be overloaded. This protects the appliance against an overload of electricity.
The fuse is rated at 13 amps, as indicated on the top of the plug. This is the maximum amount of current that the plug could pass without damaging the appliance or heating the socket. When replacing fuses, it's crucial to select the same amperage rating as the original. If you replace the fuse with one that has an alternative rating, you are at risk of overheating the socket, and potentially putting you and others at danger.
Ceramic 13 amp fuse are extremely robust and can withstand high temperatures from an oven. Ceramic elements are also fire-resistant and is therefore a better option than other types.
There are a variety of ways to install a 13 amp plug. The plug can be connected to a live socket by using a screw or plastic jaw cord clamp. The cord clamp should be tightened after the plug has been tightly pushed into place.
Some plugs will have a cardboard wiring diagram over the pins. These should be removed prior to connecting the wires. The wires should be cut to the correct length, as if they are too long, they may be crushed when plug covers are changed. The earth wire must be the longest one to ensure it is connected before the neutral and line pins.
How do I install an outlet with 13amps?
The vast majority of dual fuel range cookers in UK are equipped with a 13 amp plug. This is crucial because ovens can draw large amounts of current, while normal plug sockets have a 10 amp rating.
In general new appliances must include a plug at the point-of-sale. This is in order to be in compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances may not be connected to the plug, and this is where the problem arises.
When connecting a cooker to an existing plug socket, the first thing to do is to check that the rating of the fuse inside the fuse box is in line with the plug's rating. This is very important because a fuse that is not properly sized could be dangerous.
It is also recommended to ensure that the fuse has been completely seated into the cartridge, and there is no excessive movement. The next step is to prepare the flex that will be used. The first step is to remove the sheathing from the flex, exposing the three insulated conductors within. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) with a utility knife, without piercing the individual conductors that are insulated. This nick must be large enough to allow for the cable and sheathing to separate when the sheathing is pulled back. Finally cut off the excess sheathing and leave about 40mm over the flexing end.
This flex should be placed over the plug with the earth terminal on top and the live and neutral terminals on the bottom. Utilizing the colored conductors to guide you and the sheathing is removed from each pin and the internal cable is inserted into the appropriate terminal using the cord grip. If the plug has an attached cord clamp that is screw-type, unwind it and then pull the insulation back to expose the copper wires. Connect each insulated wire to the correct terminal by using the plug's channel. Start with the earth conductor first, then the neutral and then the live.
What is the maximum draw of a 13 amp plug?
The maximum power draw of an 13amp plug is 3kw at 230 volts. This is a significant amount of power, however the standard fuse that is fitted in a UK plugtop will not fail until the cable is heated to a dangerous temperature. A faulty plug or socket could cause fire, therefore it is important to be vigilant about the amount of power you use particularly in the kitchen.
The fuse in plugtops is ceramic, about 25mm long and rated 240V mains. They will have an BS kitemark or similar mark on the side, and they contain sand. Glass or plastic alternatives are available, but they should not be used in conjunction with a live plug.
Most dual fuel range cookers sold in the UK require hard-wired and are not able to plug directly into a wall socket. They are usually connected to a dedicated cooker ring circuit that is suitable for appliances that draw up to 20 amps.
Check the ring circuit of your home with the fuse box, or call an electrician nearby. Ask whether the sockets are on the same ring or if they are distinct. They will also be able to tell you if there is a separate circuit to power your oven.
The size of your kitchen will be a major factor when you are looking to purchase a dual fuel range cooker. We offer a broad selection of cookers that can fit any space. Choose from small 50-60cm dual-fuel models or huge 90cm+ double oven options from leading brands like Rangemaster and StovesAreUs.
We also have a broad selection of multi-function electric and gas cookers. These multi-functional appliances let you cook a variety of meals including casseroles, pasta, and curries.
Explore our full range of Cookers in Currys online or visit us in-store for a look. We provide free delivery and home installation on selected range cookers as well as flexible payment options. Our staff is ready to answer any questions you have. Contact us via email or phone. Credit is subject to status and terms and conditions apply.
What is the maximum current draw of a cooker switch?
There is a lot of confusion about what the maximum current draw of a cooker's switch is. duel fuel cookers is that the majority of cookers are not designed to connect to a standard socket, but instead are hard wired and connected to a specific oven ring circuit. This is due to the fact that they usually consume more than 20 amps when both the gas hob and electric oven are used.
You will not find dual fuel range cookers that can be fitted in a standard socket since this could pose a significant fire risk and violate electrical regulations. An experienced electrician will install any new electrical components to the kitchen cooker and will make sure that the total load (both the oven and hob) does not exceed the supply capability of that circuit.
Dual fuel range cookers blend the flexibility of a gas stove and the precision and accuracy of an electric oven. This is why they are well-liked by cooks and chefs alike. If you are looking to experiment with different cooking techniques such as searing and charcoaling, a dual fuel range cooker is the perfect option.
When buying a new cooktop, you need to consider several factors, including size, functionality and price. Additionally, you'll be required to ensure that your home is equipped with an appropriate gas hook-up to the appliance. If you aren't sure then hire a Gas Safe engineer to inspect your property before installation.
The Currys range of dual fuel range cookers offers options to suit a variety of budgets, from affordable models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something more sophisticated, we stock a variety of premium JennAir models, that come with a number new features.
It is essential to read the user's manual before purchasing a dual fuel range cooker. This will give you specific information regarding the gas and electrical requirements. It is essential to ensure that your home has a gas hook-up suitable, and you may need to get a plumber to install it for you if necessary. Based on the type of home you live in you'll also have to make sure that you have a dedicated cooker ring circuit installed and approved by a qualified electrician.